Optical-Electrical Hybrid Cable for Access Network (CAT5e+GJPFJH)

Hybrid optical-electrical cable combines optical signal transmission with power supply in one cable. It is widely used in scenarios such as 5G base station construction, communication networking in remote areas, interconnection of industrial IoT devices, security surveillance system cabling, low-voltage system integration in smart buildings, integrated communication and power supply for rail transit, remote communication for offshore wind power and oil/gas platforms, broadband coverage for rural revitalization, and emergency communication support. It meets the high-speed data transmission needs of equipment while eliminating the cost and hassle of laying separate power cables, and is especially suitable for scenarios without external power supply or with complex cabling, making it a key cable solution for efficient networking across multiple fields.

Applications

Mainly used in DC remote power supply systems or areas where power is not readily available.
Solves the communication and power supply problems of FTTH or mobile communication network terminal equipment.

Product Description: HSYZ5E+GJPFJH (layer-stranded structure, polyethylene insulation, tight-buffered fibers, aramid yarn strength member, mica tape, LSZH flame-retardant outer jacket)

Standards

YD/T 1019-2013 Polyolefin-Insulated Horizontal Twisted-Pair Cables for Digital Communication
YD/T 1258.4-2005 Indoor Optical Cable Series, Multi-Fiber Optical Cable

Product Features

Enables simultaneous optical communication and power transmission.
Excellent lateral pressure resistance and tensile performance, along with good temperature performance.
Wide operating temperature range, suitable for -40℃ to +70℃ environments.

Transmission Performance

Fiber Type	Operating Wavelength (nm)	Max. Attenuation (dB/km)	Typical Attenuation (dB/km)
62.5μm（OM1）	850/1300	3.5/1.5	3.5/1.5
50μm（OM2）	850/1300	3.5/1.5	3.0/1.0
G.652	1310/1550	0.36/0.22	0.35/0.21
G.655	1550/1625	0.22/0.26	0.21/0.24

Note: Other fiber types as required by customers are also available.

Physical/Electrical Characteristics

Parameter	Value
Propagation Delay Skew (Max.)	45ns/100m
Characteristic Impedance	4-100MHz 100±15Ω
Mutual Capacitance (Max.)	5.6nF/100m
DC Resistance (Max.)	9.5Ω/100m at 20℃
Dielectric Strength Between Conductors (Min.)	2.5kV/2s
Allowable Bending Radius	No less than 8 times the cable outer diameter

Structural Parameters

Model	Wire Gauge	Pairs	Fiber Count	Outer Diameter (mm)
HSYZ5E+GJPFJH	24AWG	4	1-2	9.6
HSYZ5E+GJPFJH	24AWG	8	1-2	10.5

Delivery Standard

Products are delivered on standard drums, 305 m of cable per drum; weight is as specified for the specific model;
For special parameters such as custom fiber types, pair counts, and fiber counts, please consult our customer service for confirmation;
Special requirements on delivery time, packaging method, or outer jacket color can be negotiated and confirmed when ordering.

Product Brochure

Optical-Electrical Hybrid Cable for Access Network (CAT5e+GJPFJH)

News Center

Product Center

Solutions

Solutions

Products

Products

Optical-Electrical Hybrid Cable for Access Network (CAT5e+GJPFJH)

Product Brochure

Related Products